CONFORM TO MIL-I-23053B/5 CONFORM TO MIL-I-23053B/5 CLASS 1 & 2
AMS-3636B COLORS AMS-3637B CLEAR SHRINK 50% (2:1 RATIO) WITH ONLY 5% LONGITUDINAL SHRINKAGE Fewer sizes covering more applications OPERATING TEMP. RANGE: -55C to 135C STOCK COLORS: BLACK, WHITE, RED, YELLOW, BLUE, GREEN AND CLEAR To order a specific color add suffix ( ) Shown to part number:| (B) | Black |
| (C) | Clear |
| (R) | Red |
| (A) | Blue |
| (W) | White |
| (Y) | Yellow |
| (G) | Green |
OTHER COLORS ARE AVAILABLE ON SPECIAL ORDER HUG-P
is an all-purpose polyolefin extruded tubing that is simple to use and provides a tight
mechanical bond. HUG-P is an irradiated, thermally stable, modified
polyolefin base product. HUG-P Clear may be used so that jacketed,
printed components or cable data is clearly visible and inspection of insulated
components, cables or terminations is simplified.
The tubing is supplied in an expanded form and easily slips over
the object to be covered. When a temperature of approximately 275F (135C) is applied, it
immediately returns to its predetermined size (approximately one-half smaller) and forms a
permanent tight-fitting mechanical bond. HUG-P Tubing will not cold-flow
or melt but retains form stability throughout its temperature range. No radioactivity
exist in or on the material and it will not emit radiation. Longitudinal shrinkage is 5%
maximum when completely recovered.
Controlled shrinkage to the correct predetermined size takes place
within seven seconds at 225F to 255F. Shrinkage will begin at 235F, but at a somewhat
slower rate. When using in an oven, temperature may range from 235F to 300F. Prolonged
exposure to these temperatures will not affect the physical or electrical properties of HUG-P
shrinkable tubing. HUG-P Clear tubing remains transparent over its entire
operation range of -55C to 135C.
Flammability: Although HUG-P
Clear is a high temperature material, it is flammable aned will burn. However, when the
tubing is shrunk over non-flammable or flame-resistant components, such as connectors,
terminal and wire, the entire assembly will not support combustion.
PART#.....................HUG-A-36P (POLYOLEFIN)
| Part # | Size | Min. ID Before Shrinkage | Rec'd ID After Shrinkage | Rec'd Nom. Wall Thickness |
|---|---|---|---|---|
| HUG-364-4P ( ) | 3/64 | .0469 | .0234 | .0156 |
| HUG-116-4P ( ) | 1/16 | .063 | .031 | .017 |
| HUG-332-4P ( ) | 3/32 | .093 | .046 | .020 |
| HUG-18-4P ( ) | 1/8 | .125 | .062 | .020 |
| HUG-316-4P ( ) | 3/16 | .187 | .093 | .020 |
| HUG-14-4P ( ) | 1/4 | .250 | .125 | .025 |
| HUG-38-4P ( ) | 3/8 | .375 | .187 | .025 |
| HUG-12-4P ( ) | 1/2 | .500 | .250 | .025 |
| HUG-34-4P ( ) | 3/4 | .750 | .375 | .030 |
| HUG-1-4P ( ) | 1 | 1.000 | .500 | .035 |
| HUG-112-4P ( ) | 1 1/2 | 1.500 | .750 | .040 |
| HUG-2-4P ( ) | 2 | 2.000 | 1.000 | .045 |
| HUG-3-4P ( ) | 3 | 3.000 | 1.500 | .050 |
| HUG-4-4P ( ) | 4 | 4.000 | 2.000 | .050 |
| Part # | Expanded ID | Rec'd ID | Feet Per Spool |
|---|---|---|---|
| HUG-116-MSP ( ) | .063 | .031 | 55' |
| HUG-332-MSP ( ) | .093 | .046 | 55' |
| HUG-18-MSP ( ) | .125 | .063 | 50' |
| HUG-316-MSP ( ) | .187 | .093 | 50' |
| HUG-14-MSP ( ) | .250 | .125 | 40' |
| HUG-38-MSP ( ) | .375 | .187 | 25' |
| HUG-12-MSP ( ) | .500 | .250 | 25' |
| HUG-34-MSP ( ) | .750 | .375 | 20' |
| Part # | Expanded ID | Rec'd ID | Feet Per Spool |
|---|---|---|---|
| HUG-116-CSP ( ) | .063 | .031 | 100' |
| HUG-332-CSP ( ) | .093 | .046 | 100' |
| HUG-18-CSP ( ) | .125 | .063 | 100' |
| HUG-316-CSP ( ) | .187 | .093 | 100' |
| HUG-14-CSP ( ) | .250 | .125 | 100' |
| HUG-38-CSP ( ) | .375 | .187 | 100' |
| HUG-12-CSP ( ) | .500 | .250 | 100' |
| HUG-34-CSP ( ) | .750 | .375 | 100' |
| Part # | Color | Part # | Color | Exp. Diameter | Diameter When Shrunk |
|---|---|---|---|---|---|
| HUG-364 | Black | HUG-364C | Clear | 3/64 | 3/128 |
| HUG-116 | Black | HUG-116C | Clear | 1/16 | 1/32 |
| HUG-332 | Black | HUG-332C | Clear | 3/32 | 3/64 |
| HUG-18 | Black | HUG-18C | Clear | 1/8 | 1/16 |
| HUG-316 | Black | HUG-316C | Clear | 3/16 | 3/32 |
| HUG-14 | Black | HUG-14C | Clear | 1/4 | 1/8 |
| HUG-38 | Black | HUG-38C | Clear | 3/8 | 3/16 |
| HUG-12 | Black | HUG-12C | Clear | 1/2 | 1/4 |
| HUG-34 | Black | HUG-34C | Clear | 3/4 | 3/8 |
| HUG-1 | Black | HUG-1C | Clear | 1 | 1/2 |
| Part # | Color | Part # | Color | Exp. Diameter | Diameter When Shrunk |
|---|---|---|---|---|---|
| HUG-116-5V | Black | HUG-116-5VC | Clear | 1/16 | 1/32 |
| HUG-332-5V | Black | HUG-332-5VC | Clear | 3/32 | 3/64 |
| HUG-18-5V | Black | HUG-18-5VC | Clear | 1/8 | 1/16 |
| HUG-316-5V | Black | HUG-316-5VC | Clear | 3/16 | 3/32 |
| HUG-14-5V | Black | HUG-14-5VC | Clear | 1/4 | 1/8 |
| HUG-38-5V | Black | HUG-38-5VC | Clear | 3/8 | 3/16 |
| HUG-12-5V | Black | HUG-12-5VC | Clear | 1/2 | 1/4 |
| HUG-A-5V | Black | HUG-A-5VC | Clear | Asst. Diameter | Asst. Diameter |
| Part # | Color | Exp. Diameter | Diameter When Shrunk |
|---|---|---|---|
| HUG-116-PAK | Red, Blue, White, Yellow, Green | 1/16 | 1/32 |
| HUG-332-PAK | Red, Blue, White, Yellow, Green | 3/32 | 3/64 |
| HUG-18-PAK | Red, Blue, White, Yellow, Green | 1/8 | 1/16 |
| HUG-316-PAK | Red, Blue, White, Yellow, Green | 3/16 | 3/32 |
| HUG-14-PAK | Red, Blue, White, Yellow, Green | 1/4 | 1/8 |
| HUG-38-PAK | Red, Blue, White, Yellow, Green | 3/8 | 3/16 |
| HUG-12-PAK | Red, Blue, White, Yellow, Green | 1/2 | 1/4 |
| Part # | Color | Part # | Color | Exp. Diameter | Diameter When Shrunk |
|---|---|---|---|---|---|
| HUG-116-10V | Black | HUG-116-10VC | Clear | 1/16 | 1/32 |
| HUG-332-10V | Black | HUG-332-10VC | Clear | 3/32 | 3/64 |
| HUG-18-10V | Black | HUG-18-10VC | Clear | 1/8 | 1/16 |
| HUG-316-10V | Black | HUG-316-10VC | Clear | 3/16 | 3/32 |
| HUG-14-10V | Black | HUG-14-10VC | Clear | 1/4 | 1/8 |
| HUG-38-10V | Black | HUG-38-10VC | Clear | 3/8 | 3/16 |
| HUG-12-10V | Black | HUG-12-10VC | Clear | 1/2 | 1/4 |
© 1998, Russell Industries, Inc.
and its affiliated Companies. All Rights Reserved.
This Page was last modified on Wednesday, March 27, 2002.