HEAT SHRINKABLE DUAL ENCAPSULATING ADHESIVE POLYOLEFIN
WALLSHRINK=33% (=3:1 RATIO) DUB Series is a flexible, radiation cross-linked, heat shrinkable, dual-wall, adhesive coated polyolefin material that is rated for continuous operation at 125C. As DUB series shhrink, the inner adhesive liner melts and flows to seal and encapsulate components or splices contained within.Part # | Size | Minimum Expansion | Maximum Rec'd | Nom. Rec'd Wall |
---|---|---|---|---|
HUG-18-4DUB | 1/8" | .125 | .023 | .038 |
HUG-316-4DUB | 3/16" | .187 | ..060 | .043 |
HUG-14-4DUB | 1/4" | .250 | .080 | .047 |
HUG-38-4DUB | 3/8" | .375 | .120 | .050 |
HUG-12-4DUB | 1/2" | .500 | .157 | .055 |
HUG-34-4DUB | 3/4" | .750 | .230 | .075 |
HUG-1-4DUB | 1" | 1.000 | .320 | .100 |
HUG-112-4DUB | 1-1/2" | 1.500 | .530 | .100 |
HUG-2-4DUB | 2" | 2.000 | .800 | .100 |
PROPERTY/UNITS Physical |
TEST METHOD | VALUE Class 1 | VALUE Class 2 |
---|---|---|---|
Tensile, psi, min. | ASTM D638 | 1500 | 1500 |
Elongation, % min. | ASTM D638 | 200 | 200 |
Flow of inner wall | MIL-I-23053 | Pass | Pass |
Specific gravity, max. | ASTM D792, Method A | 1.3 | 1.2 |
Heat resistance, %, E, min. | 168hrs @ 175C | No dripping, flowing or cracking of outer wall | No dripping, flowing or cracking of outer wall |
Heat shock | 4hrs @ 250C | No dripping, flowing or cracking of outer wall | No dripping, flowing or cracking of outer wall |
Secan modulus, psi, max. | ASTM D882 | 1.5 x 10(4) | 1.8 x 10(4) |
Longitudinal change, % max. | MIL-I-23053 | 10% | 10% |
Low temp. brittleness | ASTM D746 | No cracking | No cracking |
Procedure B (-55C) |
PROPERTY/UNITS Electrical |
TEST METHOD | VALUE Class 1 | VALUE Class 2 |
---|---|---|---|
Dielectric strength, volts/mil, min. | ASTM D876 | 500 | 500 |
Volume resistivity, ohms-cm, min. | ASTM D257 | 10(14) | 10(15) |
Dielectric constant, max | ASTM D150 | 3.1 | 3.1 |
Voltage withstand | ASTM D149 | 2500 | 2500 |
PROPERTY/UNITS Chemical* |
TEST METHOD | VALUE Class 1 | VALUE Class 2 |
---|---|---|---|
Water absorbtion, % max. | ASTM D570 (procedure A) | 0.5 | 0.5 |
Corrosion (copper contact) | ASTM D2671 | Non-corrosive | Non-corrosive |
Flammability* | UL VW-1 | Pass | Not Flame retarded |
Note: Adhesive liner is not flame retarded - Self extinguishes | |||
Fluid resistance | 24hrs @ 23C | ||
Tensile, psi min. | 1000 | 1000 | |
Dielectric strength, volt/mil, min. | 400 | 400 | |
MIL-H-5606 Hydraulic | |||
MIL-T-5624 JP4 | |||
MIL-L-7808 Lube Oil | |||
SS-S-550 5% NaCl | |||
MIL-A-8243, De-ice Fluid | |||
Fungus resistance | ASTM G21 | Non-nutrient | Non-nutrient |
Shrink Temp., nominal | 125C | 125C |
* Typical values will normally exceed specification limits which are based on UL 224 standards and MIL-I-23053/4 Class 3
RUSSELL | MILITARY | AMS | UL |
---|---|---|---|
DUB Series | MIL-I-23053/4 | UL 224 105C VW-1 |
HUG-DUB DEAL |
1/2 HUG-DUB DEAL |
HUG-18-DWH | (8PCS) |
HUG-316-DWH | (8PCS) |
HUG-14-DWH | (6PCS) |
HUG-38-DWH | (6PCS) |
HUG-12-DWH | (6PCS) |
HUG-34-DWH | (4PCS) |
HUG-1-DWH | (4PCS) |
HUG-108-TC | (1ROLL) |
HUG-108-TB | (1ROLL) |
HUG-26TB | (1ROLL) |
Each deal comes with display board, hooks and back up cards. |
© 1998, Russell Industries, Inc.
and its affiliated Companies. All Rights Reserved.
This Page was last modified on Wednesday, March 27, 2002.